9100 Series, 200V/250kHz

9100 Series: 5 kW to 30 kW (up to 60 kVA), up to 150A continuous, single-phase

AE Techron’s 9100 Series amplifiers are 200Vp, DC-to-250 kHz capable amplifiers that offer a unique combination of switch-mode efficiency and linear-amplifier-like fidelity in a single, compact package. They are able to drive virtually any type of load without a reduction in rated power, with low distortion and low DC drift. They are also fast enough to meet 5µs surge and dropout requirements.

The 9100 series is a powerful and flexible partner when the environment is difficult or existing AC Mains options are limited. It is able to be powered from any normal single-phase AC mains voltage (100VAC — 250VAC). It is power-efficient, producing up to 2,000 watts output from a 20A, 120V AC mains supply, and up to 5 kW* from 230V or 240V sources.

This combination of features makes the 9100 series an ideal solution for a wide range of high-current, low-voltage applications that require both DC power and quick surges or drop-outs, like those found in conducted immunity testing of DC-powered systems in the automotive and aviation markets.

*9105 output is 4.5 kW from 230V or 240V sources; output for all other models is 5 kW.

Wide-Bandwidth, High-Power Switch-Mode Amplifier

Stable when driving highly capacitive loads.
Four-quadrant operation.
Fixed or variable gain.
User-selectable current limit to protect fragile DUTs or where specified in the Standard.
DC enabled or DC blocked and DC Servo (for driving transformer-coupled loads or coils).
Balanced and/or unbalanced input.
Operate as a voltage-controlled voltage source or voltage-controlled current source.
Variable output impedance from 0 to 1 ohm (Voltage mode).

Key Performance Capabilities:

Bandwidth – DC to 250 kHz
Minimum Drop/Rise Time – 5µs
Slew Rate – Up to 150 V/µs
Max Voltage – 0 to 200 V_p
Max Current – Up to 37 to 100 A_p
Distortion – <0.1% at 1 kHz below clip
Max Long-Term Power – 5 kW to 30 kW**
Typical Output Ripple – 0.6V RMS

*Models available with output power from 5 kW to 30 kW (capable of up to 60 kVA)

Output

CONTINUOUS AC OUTPUT CURRENT				CONTINUOUS DC OUTPUT CURRENT*
VOLTS RMS	9105	9110	9115	VOLTS DC	9105	9110	9115
30	37A	74A	100A	13.5	35A	60A	90A
60	37A	74A	80A	24	35A	60A	90A
120	37A	37A	37A	48	34A	60A	90A

Note: Performance data is for a purely resistive load; performance will be improved into loads that are partially or completely reactive.

Common Data (all models)

Operating Modes: AC, DC, and AC + DC
Frequency, AC Mode Output (-3 dB): DC – 250 kHz
Max Voltage Ranges (no load),
   AC: 0 – 140 V_RMS
   AC + DC: 0 – ±200 V_P
Load Regulation (ref to full scale): <0.05%, DC to 100 Hz; <0.1%, 10 Hz to 10 kHz
Line Regulation (full scale): 100V to 250V AC_RMS
Harmonic Distortion,
   80 kHz, Low-passed: Less than 0.3% from 10 Hz to 30 kHz;
   0.5% up to 50 kHz
   30 kHz, Low-passed: Less than 0.1% from 10 Hz to 50 kHz

DC Offset: <2 mV
Distortion: <1.0%
Voltage Slew Rate, 8Ω: 150V per µs
Efficiency: 85%, typical
Power Factor: .98, typical
Source Impedance: 5 mΩ + 6 µH
Cooling: Internal forced-air fans
Protection: Over/under voltage, over current, over temperature
Input, Signal In: BNC connector (unbalanced)
Output: High-current barrier strip

Operating Environment,
    Temperature: 5 °C to 50 °C (41 °F to 122 °F);
Maximum output power de-rated above 30 °C (86 °F)
   Humidity: Maximum relative humidity 80% for temperatures
   up to 31 °C decreasing linearly to 50% relative humidity at 40 °C
   Altitude: 3000 m Maximum
   Environment: Indoor Use Only, Pollution degree 2
Equipment Class: Group 1 Class A
Transient Overvoltage: Overvoltage Category II

Models

9105

Maximum Continuous Output Current: 37_RMS AC or DC
Power: 2 kW from 20A, 120VAC; 4.5 kW from 30A, 230/240VAC
Supply Voltage: Universal power supply with PFC, single-phase, 100V to 240VAC ±10%, 30A, 50/60 Hz
Dimensions (HxWxD): 3.47 x 17.3 x 22.8 in. (8.81 x 43.94 x 57.91 cm)
Weight: Approximately 40 lbs. (18.14 kg)

9110

Maximum Continuous Output Current: 74A_RMS AC or DC
Power: 5 kW
Supply Voltage: Universal power supply with PFC, single-phase, 100V to 240VAC ±10%, 30A, 50/60 Hz
Dimensions (HxWxD): 3.47 x 17.3 x 22.8 in. (8.81 x 43.94 x 57.91 cm)
Weight: Approximately 45 lbs. (20.41 kg)

9115

Maximum Continuous Output Current: 100A_RMS AC or DC
Power: 5 kW
Supply Voltage: Universal power supply with PFC, single-phase, 100V to 240VAC ±10%, 30A, 50/60 Hz
Dimensions (HxWxD): 3.47 x 17.3 x 22.8 in. (8.81 x 43.94 x 57.91 cm)
Weight: Approximately 50 lbs. (22.68 kg)