The miniaturized LSProbe E-Field Probes ensure unattended, uninterrupted measurements combined with high resolution, high speed and low noise over the entire test period.
With the galvanically insulated power supply, the need for batteries is now eliminated. The field probes do not only measure average values but the time course of fields. With an unprecedented wide dynamic range and fast pulse response, LSProbe provides the user completely new measuring options.
LSProbe allows for a higher efficiency through faster, shorter and lower-cost testing intervals.
Two different types are available:
10 Hz – 8.2 GHz
Laser-Powered E-Field Probe
ISO / IEC / ETSI Testing – Selected International Standards
| ISO 11451-2 | Road vehicles — Vehicle test methods for electrical disturbances from narrow band radiated electromagnetic energy — Part 2 Off-vehicle radiation sources |
| ISO 11451-5 | Road vehicles — Vehicle test methods for electrical disturbances from narrow band radiated electromagnetic energy — Part 5: Reverberation chamber |
| ISO 11452-2 | Road vehicles — Component test methods for electrical disturbances from narrow band radiated electromagnetic energy — Part 2: Absorber-lined shielded enclosure |
| ISO 11452-11 | Road vehicles — Component test methods for electrical disturbances from narrow band radiated electromagnetic energy — Part 11: Reverberation chamber |
| IEC 61000-4-3 | Electromagnetic compatibility (EMC) – Part 4-3 : Testing and measurement techniques – Radiated, radio-frequency, electromagnetic field immunity test |
| IEC 61000-4-21 | Electromagnetic compatibility (EMC) – Part 4-21: Testing and measurement techniques – Reverberation chamber test methods |
| ETSI EN 300 328 | Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz band; Harmonised Standard for access to radio spectrum |
| ETSI EN 301 893 | 5 GHz RLAN |
| RTCA/DO-160 | |
| Industrial OEM standards |
Features of LSProbe
- Frequency range from 10 Hz – 18 GHz
- Unrivaled measurement speed (radar pulse measurement)
- Highest measurement accuracy (linearity and resolution)
- Greatest dynamics over the entire frequency range
- Reliable and fail-safe design
- No start-up time
- Immediately ready for use
- Customer oriented warranty and service conditions
- Accredited calibration
Test Automation Integration
- Rohde & Schwarz – ELEKTRA
- Rohde & Schwarz – EMC32 – Version 10.0
- Nexio – BAT-EMC
- Ametek – Compliance 5
- Ametek – Compliance and Immunity 6 (CIS 6)
- ETS-Lindgren – TILE!
- Raditeq – RadiMation
- Teseq – WIN 6000
- Techno Science Japan – TEPTO
- AR – Emcware
- Frankonia – ProveEMC
- TDK RF Solutions – Radiated Immunity Lab
- Toyo – VI5RS – Radiated Immunity for Automotive testing
- Toyo – IM5RS – Radiated Immunity for IEC 61000-4-3 testing
LSProbe Accesories
The CI-250+ is equipped with a 4.3″ touch screen and Ethernet interface. It runs the LUMILOOP TCP Server and a simplified GUI.
CI-250+ has an internal power supply. The fiber optic connection as well as triggering and synchronization options are unchanged compared to a classic CI-250.
Dimensions: width x height x depth = 200 x 88 x 150 mm (fits in 2 19″ height units, rack mount kit available)
The Computer Interface CI-250+ is an optional upgrade of the Computer Interface CI-250.
It can only be ordered combined with one of the following part no.: 1111, 1112, 1113, 1120, 2107-2109, 2117 – 2119
| Upgrade CI-250+ | Part. No. 1005 |
| CI-250+ Rack Kit | Part. No. 3026 |
Stands for E-Field Probes
The table top probe stand base allows for mounting the pole for positioning the field probe.
Part No.: 1307
The table top probe stands are available for positioning the LSProbe center above the table in the following heights: 100mm, 125mm, 150mm, 200mm, 300mm. The Mounting poles have a relative permittivity better than 2.7 at 1 kHz.
| Height above table | Part No. |
|---|---|
| 100 mm | 1308 |
| 125 mm | 1309 |
| 150 mm | 1310 |
| 200 mm | 1311 |
| 300 mm | 1312 |
LSProbe Table Probe Stand, 77 mm, 90° angle
Base Plate (part 1307) + Mounting Pole, 77 mm, 90° (part 1326)
Ideal for 154 mm TEM Cell measurements, mounting pole for positioning the Field Probe’s center 77mm above surface, in 90° angle. It allows for quick mount and release as well as easy alignment of LSProbe Field Probe and has a relative permittivity better than 2.7 @ 1 kHz
The flexible tripod probe-stand for versatile positioning of LSProbes allows for quick mount and release for vertical positioning approximately 150 mm to 220 mm above surface.
A strong magnetic feet with rubber coating holds the LSProbe in position.
Part No. 1306
The lightweight floor probe stand is metal-free, has very low absorption, and a height of 2.45m above ground.
The probe can be adjusted variable at any angle in the height needed from 0.2 m – 2.53 m.
A ruler shows the exact LSProbe height above ground. The floor probe stand has lockable swivel castors and base features slots for repeated alignment.
The Floor Probe stand ist equiped with a single probe holder. Additional Probe Mounting Bracket are available on demand.
Additionally, the floor probe stand is optimized for IEC 61000-4-3 16 point field homogeneity validation.
Part No. 1316
Probe mount for floor probe stand for 1 additional probe.
Part No. 1317
Probes mount for floor probe stand for 3 additional probes.
Part No. 1382
LSMove Field Probe Positioning System
The LSMove Positioning System is a companion product to the LSProbe 1.2 Laser-Powered Field Probe, enabling automated measurements of field distributions in 3D testing volumes. LSMove’s unique design minimizes the field distortion introduced by the positioning system, enabling high-accuracy measurements.
LSMove accelerates:
LSMove is designed for high positioning accuracy and repeatability, requiring no zeroing upon start-up. Its nonconductive probe mount, probe suspension and side stands integrate seamlessly with LUMILOOP’s LSProbe Field Probe. Fiber-optic cables for the Field Probe are embedded in the straps for hassle-free positioning.
LSMove is connected via USB and includes software for manual positioning and automated operation via TCP/IP using standard SCPI commands.
LSMove speeds up:
- IEC 61000-4-3 anechoic chamber calibration
- Antenna pattern characterization
- IEC 61000-4-20 TEM-waveguide calibration, and
- IEC 61000-4-21 reverberation chamber calibration
Additional features include:
- Long-time operation
- Quick swap, fast-charging battery pack
- Fiber-optical control ports
- Wireless remote control
- Quick and simple position calibration
- Built-in hazard zone avoidance
Fiber Optic Cables
All LSProbe / Laser-Powered RF Power Meter System cases are equipped with the necessary products to plug-and-measure right when receiving the delivery.
LUMILOOP offers additional accessories.
A set of two 0.5m duplex fiber optic cables with FC/ST and E2000 connectors. The automatic closures of the E2000 connectors prevent contamination of the connection surfaces.
| Article | Part No. |
|---|---|
| Sacrifical Cable Kit | 1314 |
| E2000 Coupler for Sacrificial Cable Kit | 1320 |
We offer a sacrificial cable kit with customized length. This is a sacrificial cable with 6m length, a sacrificial cable with 0.5m length, duplex E2000 coupler and one pair of FC/ST couplers.
Part No. 1351
A separate fiber optic extension can be supplied on request in the following lengths: 5m, 10m, 15m, 20m, 30m, 50m. The cable is supplied with FC/ST connectors and a separate pair of FC/ST couplers . The LSProbe 1.2 allows for use with 1.000m optical fiber extension. The LSProbe 2.0 allows for use with 500m optical fiber extension.
We also offer outdoor fiber optic extensions in 30m and 50m lengths. On request we can also supply dual fiber optic extensions.
| Cable length | Part No. |
|---|---|
| Optical Fiber Extension 5m | 1302 |
| Optical Fiber Extension 10m | 1303 |
| Optical Fiber Extension 15m | 1304 |
| Optical Fiber Extension 20m | 1305 |
| Optical Fiber Extension 30m | 1321 |
| Optical Fiber Extension 50m | 1322 |
| Optical Fiber Extension 100m | 1323 |
An outdoor optical fiber extension is available in the following lengths: 20m, 25m, 30m, 50m, 100m, 200m.
The duplex optical-fiber extension cable is supplied with FC/ST connectors and a separate pair of FC/ST couplers.
On request we also supply dual fiber optic extensions.
| Cable length | Part No. |
|---|---|
| Outdoor Optical Fiber Extension 20m | 1334 |
| Outdoor Optical Fiber Extension 25m | 1339 |
| Outdoor Optical Fiber Extension 30m | 1335 |
| Outdoor Optical Fiber Extension 50m | 1336 |
| Outdoor Optical Fiber Extension 100m | 1337 |
| Outdoor Optical Fiber Extension 200m | 1338 |
LUMILOOP offers robust cable drums for duplex fiber optic cable. The drum is supplied with a sacrificial cable with an E2000 connector, which is connected to the extension cable, the E2000 coupler is integrated into the cable drum. The cable reel is suitable for indoor and outdoor fiber optic cables (these are not included in the scope of delivery). The small cable drum is suitable for fiber optics up to 100m. For fiber optic lengths over 100m, we offer large cable drums.
On request we also offer dual cable drums.
| Article | Part No. |
|---|---|
| Cable Drum Small <100m | 1331 |
| Cable Drum Large >100m | 1332 |
The fiber connector cleaning kit allows for cleansing the fiber optic connector to ensure reliable operation of the LSProbes.
The set consists of 400x optical fiber microscope, two packs of lint-free cassette cleaning-wipes, fiber optic cleaning-solution pen, an unfilled isopropyl alcohol (IPA) pipette/bottle and spare FC/ST dust caps and two E2000 locking caps.
For further information please read the application note 4 – AN#4 Reliable Operation of LSProbes Laser-Powered Electric-Field Probes.
PartNo. 1319
LSProbe Services
| LSProbe RE-Calibration* & Warranty Extension | Part No. |
|---|---|
| LSProbe 1.2 ISO 17025 Accredited RE-Calibration 9 kHz to 8.2 GHz | 1201 |
| LSProbe 1.2 G ISO 17025 Accredited RE-Calibration 9 kHz to 8.2 GHz, 20/50 V/m | 1203 |
| LSProbe 2.0 ISO 17025 Accredited RE-Calibration 9 kHz to 18 GHz | 1205 |
| LSProbe 1.2 System Warranty Extension | 1221 |
| LSProbe 2.0 System Warranty Extension | 1223 |
| * When ordering a new LSProbe the initial ISO 17025 accredited calibration will be offered for a reduced price. |
Downloads & Documents
For further information please click the buttons.
