– LASER POWERED SENSOR SYSTEMS –
Your experts for turnkey units for optical energy and data transmission.
Maximum miniaturized systems – from the sensor to the software.

Competencies & Philosophy

LUMILOOP’s key competence is the optical supply of sensor systems using Lasers in combination with a proprietary packaging technology and power regulation method. LUMILOOP combines this Power-over-Fiber (PoF) technology with state-of-the-art low power electronics to design and manufacture high performance electronic measurement devices which can be applied in the field of Electromagnetic Compatibility (EMC) as well as other RF applications.

By combining LUMILOOP’s E-field probes and RF power meters users can speed-up EMC chamber validation by a factor of more than 100 and thereby reduce down-time significantly. LUMILOOP’s products can also be used to characterize and validate reverberation chambers at high speed.

All of LUMILOOP’s products are defined by software to a large extend. Continual software updates for LSProbe and LSPM are provided regularly, improving performance and adding new features.

LUMILOOP provides long-term service and support for all products.

 

Products

Take a look at the product variety of .
We develop sensors for extreme areas, as modular construction kit and turnkey system.
 

Accessories

This page will guide you through the accessories availble for LSProbe and LSPM:

Fiber Optic Cables

All LSProbe / Laser-Powered RF Power Meter System cases are equipped with the necessary products to plug-and-measure right when receiving the delivery.
LUMILOOP offers additional accessories.

Sacrificial Cable Kit

A set of two 0.5m duplex fiber optic cables with FC/ST and E2000 connectors. The automatic closures of the E2000 connectors prevent contamination of the connection surfaces.

Article Part No.
Sacrifical Cable Kit 1314
E2000 Coupler for Sacrificial Cable Kit 1320
Sacrificial Cable Kit Customized Length 6m+0.5m

We offer a sacrificial cable kit with customized length. This is a sacrificial cable with 6m length, a sacrificial cable with 0.5m length, duplex E2000 coupler and one pair of FC/ST couplers.
Part No. 1351

Optical Fiber Extension Cable

A separate fiber optic extension can be supplied on request in the following lengths: 5m, 10m, 15m, 20m, 30m, 50m. The cable is supplied with FC/ST connectors and a separate pair of FC/ST couplers . The LSProbe 1.2 allows for use with 1.000m optical fiber extension. The LSProbe 2.0 allows for use with 500m optical fiber extension.

We also offer outdoor fiber optic extensions in 30m and 50m lengths. On request we can also supply dual fiber optic extensions.

Cable length Part No.
Optical Fiber Extension 5m 1302
Optical Fiber Extension 10m 1303
Optical Fiber Extension 15m 1304
Optical Fiber Extension 20m 1305
Optical Fiber Extension 30m 1321
Optical Fiber Extension 50m 1322
Optical Fiber Extension 100m 1323
Outdoor Optical Fiber Extension Cable

An outdoor optical fiber extension is available in the following lengths: 20m, 25m, 30m, 50m, 100m, 200m.
The duplex optical-fiber extension cable is supplied with FC/ST connectors and a separate pair of FC/ST couplers.
On request we also supply dual fiber optic extensions.

Cable length Part No.
Outdoor Optical Fiber Extension 20m 1334
Outdoor Optical Fiber Extension 25m 1339
Outdoor Optical Fiber Extension 30m 1335
Outdoor Optical Fiber Extension 50m 1336
Outdoor Optical Fiber Extension 100m 1337
Outdoor Optical Fiber Extension 200m 1338
Cable Drum

LUMILOOP offers robust cable drums for duplex fiber optic cable. The drum is supplied with a sacrificial cable with an E2000 connector, which is connected to the extension cable, the E2000 coupler is integrated into the cable drum. The cable reel is suitable for indoor and outdoor fiber optic cables (these are not included in the scope of delivery). The small cable drum is suitable for fiber optics up to 100m. For fiber optic lengths over 100m, we offer large cable drums.
On request we also offer dual cable drums.

Article Part No.
Cable Drum Small <100m 1331
Cable Drum Large >100m 1332

Fiber Connector Cleaning Kit

Fiber Connector Cleaning Kit incl. Fiber Microscope

The fiber connector cleaning kit allows for cleansing the fiber optic connector to ensure reliable operation of the LSProbes.
The fiber connector cleaning kit consists of:

  • 400x optical fiber microscope
  • two packs of lint-free cassette cleaning-wipes
  • fiber optic cleaning-solution pen
  • an unfilled isopropyl alcohol (IPA) pipette/bottle
  • spare FC/ST dust caps and two E2000 locking caps

Stands for E-Field Probes

Tabletop Probe Stand – Base

The table top probe stand base allows for mounting the pole for positioning the field probe.

Part No.: 1307

Tabletop Probe Stand – Mounting Poles

The table top probe stands are available for positioning the LSProbe center above the table in the following heights: 100 mm, 125 mm, 150 mm, 200 mm, 300 mm.
The Mounting poles have a relative permittivity better than 2.7 at 1 kHz.

Height above table Part No.
100 mm 1308
125 mm 1309
150 mm 1310
200 mm 1311
300 mm 1312
Tabletop Probe Stand – Mounting Poles

LSProbe Table Probe Stand, 77 mm, 90° angle
Base Plate (part 1307) + Mounting Pole, 77 mm, 90° (part 1326)

Ideal for 154 mm TEM Cell measurements, mounting pole for positioning the Field Probe’s center 77mm above surface, in 90° angle. It allows for quick mount and release as well as easy alignment of LSProbe Field Probe and has a relative permittivity better than 2.7 @ 1 kHz

 

Flexible Probe Stand

The flexible tripod probe-stand for versatile positioning of LSProbes allows for quick mount and release for vertical positioning approximately 150 mm to 220 mm above surface.
A strong magnetic feet with rubber coating holds the LSProbe in position.

Part No. 1306

Floor Probe Stand

The lightweight floor probe stand is metal-free, has very low absorption, and a height of 2.45 m above ground.

The probe can be adjusted variable at any angle in the height needed from 0.2 m – 2.53 m.
A ruler shows the exact LSProbe height above ground. The floor probe stand has lockable swivel castors and base features slots for repeated alignment.

The Floor Probe stand ist equiped with a single probe holder. Additional Probe Mounting Bracket are available on demand.


Additionally, the floor probe stand is optimized for IEC 61000-4-3 16 point field homogeneity validation.

Part No. 1316

1 Probe Mount for Floor Probe Stand

Probe mount for floor probe stand for 1 additional probe.

Part No. 1317

3 Probes Mount for Floor Probe Stand

Probes mount for floor probe stand for 3 additional probes.

Part No. 1382

LSMove Field Probe Positioning System

The LSMove Positioning System is a companion product to the LSProbe Laser-Powered E-Field Probe, enabling automated measurements of field distributions in 3D testing volumes. LSMove’s unique design minimizes the field distortion introduced by the positioning system, enabling high-accuracy measurements.
LSMove accelerates:
LSMove is designed for high positioning accuracy and repeatability, requiring no zeroing upon start-up. Its non-conductive probe mount, probe suspension and side stands integrate seamlessly with LUMILOOP’s LSProbe E-Field Probes. Fiber-optic cables for the Field Probe are embedded in the straps for hassle-free positioning.
LSMove is connected via USB and includes software for manual positioning and automated operation via TCP/IP using standard SCPI commands.

LSMove speeds up:

  • IEC 61000-4-3 anechoic chamber calibration
  • Antenna pattern characterization
  • IEC 61000-4-20 TEM-waveguide calibration, and
  • IEC 61000-4-21 reverberation chamber calibration

Additional features include:

  • Long-time operation
  • Quick swap, fast-charging battery pack
  • Fiber-optical control ports
  • Wireless remote control
  • Quick and simple position calibration
  • Built-in hazard zone avoidance